SQUARE DEAL MILL & CABINETS

ONLINE ONLY AUCTION.
Bidding Opens May 1 and starts ending on May 21. Auction personnel will be onsite the afternoon of May 21 following the sale of the Real estate to assist with online bidding. the bidding will start closing at 4:00 PM-CDT. There will be a 5 minute "auto extend" at the lot level, meaning that if a bid is place within 5 minutes of the scheduled end for that lot, be time is extended by 5 minutes. this continues until no bids are received. There will be a staggered closing, meaning 50 lots will start closing ever 20 minutes.
If you have not registered to bid on this or some other MarkNet Member site, you must complete the registration. A credit card is required to register, but other forms of payment are acceptable (see below). No personnel at Thomas R Hunt Auctioneers has access to the credit card information. It is all stored on a secure server with one of the largest credit card processors in America. Charges are only placed against your card at your direction, or if you fail to pick up you purchases in a timely manner. IMPORTANT: If you have a valid tax exemption certificate, please enter the number on the registratiion form as requested.
Please take a few moments to read the information supplied here and under the auction Information tab. By agreeing to the terms and conditions and placing a bid, you are entering into a legal and binding contract. Know what you are bidding on before you click place bid. If you are unsure, do not bid. You may place a Maximum Bid which will be bid up by the system as per the established increments. You may place a "Force Bid" which will be entered at the full amount immediately.
Bidding on this auction will continue online only until May 21. At 4:00 pm on May 21, the auction will start closing 100 lots at a time every 20 minutes. However, there is an "Auto Extend" of 5 minutes, meaning that the ending time is extended by 5 minutes if the lot receives a bid within 5 minutes of the scheduled ending time. This process may repeat itself many times. The lot will close when no further bids are received in the last 5 minutes.
All lots in this auction sell with online bidding only. Individuals with no other access to the internet may come to the sale site during one of the open house periods and place their maximum bid on the lots of their choice. These maximum bids will be entered into the bidding platform and the system will bid those up at the established increments as other bids come in. You will remain the high bidder up to and including your maximum bid. Due to the inability of our staff to increase your maximum bid should it be exceeded, it is advised that you make arrangements to place and monitor your bids directly on the website.
Real Estate and personal property will be available for inspection on Sunday May 17 from 1 pm to 4 pm, and auction ending day, May 21 from 9 am to 3 pm. NO ONE WILL BE PERMITTED IN THE BUILDING AFTER 3 PM ON MAY 21.
A 10% Buyer Premium will be added to the final bid to determine the selling price. 6% KY Sales and Use Tax will be collected unless a valid exemption certificate is presented or it is an out of state purchase. No items may be removed prior to payment which can be in the form of cash, in-state check with proper identification, wire transfer, credit card, or certified funds.
Purchases will be available for pick up on Tuesday May 26 and Wednesday May 27 from 9 am to 5 PM and Friday May 30 from 9 am to 6 pm. No items will be released for pick up prior to this schedule. Special arrangements may be possible for the larger pieces of equipment. A fork lift and operator will be available. However, neither the sellers nor the auctioneers will have any liability for damage which might occur during the removal of any equipment. Buyers are to come prepared with the necessary tools to remove any items fastened to walls, floor, or ceilings. No manpower will be provided for loading, etc beyond the forklift and operator.
Model G9957 7.5 HP, 230 V, 3 phase, 3450 RPM 46"x 85" Ext. table to left, 20" Ext to right w/Delta Uni-Fence, adjust. cross cut guide -153"x 46" , includes electric cable to disconnect box.
PSI Woodworking product. Adjustable ceiling mounted dust pick-up, with approximately, 15'4" hose (to first y in vac. system)
Model G9882 2 HP 220/240v single phase, 1750 RPM 6'x10' belt. Date: Oct. 2003 Serial Number 92103002
Model G7210 7.5 HP 220v 3 phase Serial # 100571, 3450 RPM Cross cut guide. 3 extra blades( fine tooth carbide) 49"x38" Table ext., with 72" fence, extra insert overall 98" x 38". PLEASE NOTE: Power feeder is not included.
PSI Woodworking Product- Adjustable dust collection pick-up for table saw. To be removed by buyer
Model G0539, 15 HP, 220/440v, 3 phase, Date: 9/30/03 Serial #: 03093003 conveyor motor- 1HP, 220/440, 3 phase, Table elevation motor 1/4 HP, 220/440 v, 3 phase. Includes a number of sanding belts and wiring to disconnect box.
Model G1018 9'x65" table 1.5 HP, 220v. Single phase. Serial number: 636632
Model 87. Made in McMinnville, TN S/N 87L94. Built-in blade welder, blade 12'7", 15 or more extra blades. Appear to be 220v, 3 phase, 19" throat
Table 35.5" x 28", 7.5 HP, 220 v, 3 phase, 3450 RPM, 3/4", 1", & 1.25" spindle sizes. Date: March 2003. Serial Number 204941. PLEASE NOTE: Power feed is not included.
Porter Cable Model 552, 120 V, Production pocket cutter on shop-built plywood base. Serial Number 025366
Model G7214Z, 7.5 HP, 220v, 3 phase, Date: July 2004, Serial # 030978 Interchangeable spindle sizes, 3/4", 1" & 1 1/4", 3 speed, 35.5"x28" table. PLEASE NOTE: Power feeder is not included
1.5 HP 110/220V, single phase, spindle sizes 1/2" & 3/4" , Table 20.25" x 18" w/added shop-built table & fence. Date: 2003 Serial Number: 033423
Model G4185, 2 HP, 220v, single phase, Date: 2003, Serial # 03110, motor 3450, bit speed 4000 RPM, 1 head 2 & 3 spindle heads available. With foot operated hold down
Model G1071, 1 HP, 110/220v, single phase, Date: 2003, Serial # 044114. 10 spindles of various size
Model G1013 .5 HP, 110/220v,Date: 2003, Serial # 110052, 1" Belt, 8" Disc, includes sanding discs
Model G1035, 1.5 HP, 110/220v,single phase, Date 2003, Serial # 033485 1/2 & 3/4 spindle sizes. PLEASE NOTE: Power feeder is not included.
Model 206. 2 HP, 220v, Serial number:20103 Used to shape arch mouldings. With optional elliptical jig. Includes 11 sets of profile knives plus 2 sets each of 5" and 6" blanks.
Safety Speed Cut Model 6400 panel saw. Serial number: 50334; Motor unit Model 5860 T2:78 Frame 120 x 73
175 PSI, 25.0 SCFM @ 100 PSI. 7.5 HP (Peak 11 HP) 80 gallon, 240v, single phase, oil lubricated. Date 2-20-04. Serial Number: 240 300 5066
175 PSI, 25.0 SCFM @ 100 PSI. 7.5 HP (Peak 11HP) , 80 gallon, 240v, single phase, oil lubricated. Date: 5-27-03. Serial Number: 203 301 2272.
Weinig Profimat 22N, 3 phase, 230 volt, (Serial Number: 02264991), (Engineering Number: 58137), (Year 1990, fully refurbished by Weinig 2004) and a Weining Rondamat 934, 230 volt, 3 phase, (Serial Number 934-404), (Year 1994) . Tool/cutting head grinder Michael Weining AG Model: R 934 Constructed: 1994 Mach. No.934-404. Voltage (IV): 230; Frequency (H2): 60 INCLUDES: Weinig Measuring Stand; Tool Cart; 203 sets of profile knives and templates; 2 sets 2" straightedge knives; 2 sets 4" straightedge knives; 3 sets 9" straightedge knives; includes cabinets for storage of knives; Cutter Heads-4 - 2 3/8"; 6 - 4"; 2 - 6"; 4 - 9"; Feed Rollers-7 - 3/4" x 5 1/2"; 4 - 2" x 5 1/2"; 1 - 2 3/8" x 5 1/2". Spindle Ring Bushings-5 - 2 7/16"; 5 - 15/16"; 5 - 5/8"; 7 - 3/8"; 6 - 5/16"; 9 - 3/16".
All above to be sold as a package, as is, where is. Machinery is functioning and in regular use. Includes wiring to cut off point. Seller will disconnect from cut-off; buyer responsible for removing machinery.
Downloadable manual @ http://pdfebooklibrary.com/manual/weinig-p22n-moulder-manual.pdf
Olympia 4" vise
Grizzly 8" grinder. Model H4379 8" 3450 RPM, Date: 3/29/04 Serial # 040165. 5/8 arbor, includes wheel dreser- 110v, 1/2 HP
Makita Model 2414 NB 14" Blade. Serial Number: 526128K 120 VoltOn a shop-built stand with castors.
Model G9741 24" Planer, 10 HP, 220 Volt, 3 Phase. Cutter head speed 5000 RPM, var. feed rate 20-40 FPM, Date:10/03, Serial # 03B1270. Extra set of knives
Model G0525, 3 HP motor , 3 HP, 220 Volt, single phase, Motor Speed: 3450 RPM. Suction Capacity: 2100 CFM, Static Pressure: 10", Inlet size: 8", Bag Size : 19 5/8 x 88, Impeller- 13". Riveted steel, weight: 254 lbs, dust collector included. Date January 2003. Serial Number: 003759
Motor by The Dayton Electic Mfg. Co. Model: K S60NB-1206. Comes with rolling table & saw blades
Model G7946 Swing: 34" Motor Size: 1/2 HP, 110 v, single phase, Manuf. Date: March 2004 Serial # 11444
Model G7946 Motor Size: 1/2 HP, 110 v, single phase, Manuf. Date: Nov 2003, Serial # 11122
2 speed, 16" w/ quickset blade changing feature, rolling table included
Steel frame, 1400 lbs., winch approx. 77" tall
Model 32-325, Comes with accessory stand & shelf/worktable 115v., single phase, 97"w x 30"d x 58.5"h 3/4 hp, Serial Number: 03G41863
Model EP/11, Year 2003 Serial # 270, 220v, 3 phase. Purchased new by seller. Only factory installed regulators will remain with machine.
Model DW708, Serial #56497 Saw only. Saw has been removed from the stand.
Model DW723, Date: 11-22-06, Catalog # 50-155
Grizzly Heavy Duty Wood Lathe Model G1495. 3/4 HP, 110 Volt, Date: June 2004. Serial #: 001947. Optional G2891 copy attachment - max 2 mm/each, Date: 12/2008. Lathe - swing over bed: 14", swing over gap: 17" Motor speed: 1720 RPM
Insert C single phase, Serial # 5812, Rolling cabinet/Stand included. No hose included. Date: 2006, 110Volt, 1.5 HP.
rolling cart included, clamping system for a biscuit joiner
Model G4181 Mfg#20043165 Date: April 17, 2004 Voltage: 220 Phase 1 Serial #:08940